Fixation Clamp ø100 mm

This fixing clamp is used to connect a fan to a circular air duct of the same diameter. At the same time it absorbs vibrations from the fan to the air duct.

The clamp is made of galvanised sheet steel, fitted with a foam rubber polyethylene seal with a thickness of 6 millimetres on the inner side. For the fixation of the clamp there are two M6 screws at the ends of the adjusting ring: screws as well as nuts are part of the product. The general constructional regulation of an adjusting ring guarantees a high standard of construction.

• Suitable for pipe Ø 100 mm
• Clamp is 6 cm wide