Mist-humidifier 1200ml/h 3 Membranes incl. swim ring

Humidifier for a better indoor climate

This high-quality fogger with 3 membranes is compact and suitable for use in the smallest of spaces. The fogger generates electrical waves in the ultrasonic range, these electrical oscillations of the ceramic membranes create mist or produce a fine water vapour, this increases the humidity and improves the room climate. The unit can be used permanently under water because it has an integrated circuit and an Omniseal seal. The integrated water level sensor automatically switches off the unit as soon as the water level is too low, thus preventing damage to the ceramic disc when the water level is too low.

The specially coated housing is easy to clean of limescale deposits. The fogger was specially designed for indoor and outdoor use. The ultrasonic humidifier can be used in many ways, e.g. in garden ponds, aquariums, indoor fountains, flower decorations or swimming pools. The fogger can be operated in tanks of any size with a floating ring, which keeps the fogger approx. 2-5cm below the water surface. With an air circulation fan, the fog is optimally distributed in the room to be humidified.

If the fog output decreases after some time (approx. 3,000 hours), the ceramic disc must be replaced.

Technical data:

• Wattage: 68W
• Fog production: max. 1.2 litres/hour
• Ultrasonic frequency (KHz): 1700 ± 40
• Supply cable: 10 metres
• Dimensions: ø 6,8 cm, height 5,5 cm
• Material: nickel-plated brass / stainless steel
• Current: 3,5A
• Voltage: 24 V AC
• Recommended water depth: 2-5cm with floating ring under water surface
• Water temperature: 5º C to +50º C
• Ceramic disc: ø20mm
• Lifetime ceramic disc: approx. 3000 hours

Scope of delivery:

• 1x mist humidifier 3 membranes incl. 10 m outdoor cable.
• 1x floating ring
• 1x power supply unit