SANlight EVO-Series LED EVO 3-100 1.5 Full Spectrum 200W

SANlight EVO 3-100 1.5 with 200W LED grow lamp - plant lighting at the highest level

The EVO 3-100 1.5 was developed for the classic 1x1m grow box, or for growing areas with a depth of 1 m. With 2 EVO 3-100 1.5 you achieve high light intensities with the best homogeneity. 200W per light save you money on electricity. 545µmol/s per light add up to 2 lights in 1 square metre of tent to over 1090µmol/s, which will give you impressive results. The possibility of Easy Tilting in combination with the secondary optics brings the light where it is needed, to your plants. The optics make it easy to clean and thus maintain constant light output over a long period of time.

Here we present you with numerous facts about the new Sanlight EVO-Series 1.5 LED grow lamp.

Efficiency is not just a number in the data sheet

With the EVO series, SANlight offers advanced efficiency of more than 3µmol/J at the module level. However, during the development, much more attention was paid to the yield per area and time. The spectrum was optimised in the best possible way in countless empirical tests. The resulting broadband light spectrum extends beyond the conventional PAR range and offers a far red to red ratio that positively influences photo-morphogenesis, and thus also the quality and quantity of the harvest.

Protection and light control

As in the past, SANlight remains true to its very high quality standards. Thus, over a service life of 90,000 hours, only 10% of the light output is lost. In the development of the EVO series, the protective and light-directing secondary optics were optimised to the geometric dimensions of the luminaire. This results in incredibly homogeneous illumination with the best light intensity (PPFD). The asymmetrical secondary optics also minimise losses when transporting photons to the plants and at the same time protect the LEDs from environmental influences to which the luminaire is exposed during plant cultivation. Sulphur and other chemical substances cannot penetrate to the LED. This prevents oxidation of the LED chip reflector. The optics can be easily cleaned. The protection and the possibility of cleaning guarantee you a constant light output over many years.

The finest technology

From an almost unmanageable selection of LEDs available on the market, SANlight has selected only the best for you. As in previous years, SANlight has chosen the latest OSRAM high-power LEDs for red and far-red LEDs. When it comes to white LEDs, SANlight was convinced by the patented WICOP technology from Seoul Semiconductor. The LEDs with this technology are characterised by the absence of lead frames and silver, making them particularly robust and highly efficient.

Ready-to-dim

Every model in the EVO series is ‘ready-to-dim’. This means that the LED light is compatible with typical greenhouse control systems. Alternatively, you can retrofit the LED grow lamp with the available magnetic dimmer or Bluetooth dimmer. Compared to rotary potentiometers, SANlight dimmers are wear-free and resistant to humidity and water.

Professionalism starts with the cable

In the EVO series, all plug connections are made with high-quality waterproof connectors, which have become established in commercial horticulture over the last few decades. All accessories offered by the manufacturer are designed for the harsh greenhouse environment. This means you can easily and securely configure and dim your system according to your ideas, or connect it to a ‘daisy chain’.

Maximisation

In most grow rooms, filters and ventilation systems are mounted on the ceiling. With the EVO series, the required equipment can be positioned between the LED lights, and not a single centimetre of usable height is lost. Due to their design, lighting systems from other manufacturers have to be mounted under the ventilation system. This wastes significantly more space. This applies to both small grow tents and large professional installations.

Technical data EVO 3-100 1.5:

• 2x EVO 3-100 1.5 LED are optimal for a base area of 100x100cm
• Power input: 200W
• Power factor: > 0.95
• Input voltage range: 100-240/277 50/60 Hz
• maximum input current: 0.9@220Vac
• protection class: IP65
• permissible ambient temperature: 5-35°C
• maximum relative humidity: 99%
• emission wavelength: 400-780 nm
• photon flux density: 545 µmol/s
• efficiency: > 3 µmol/s
• Beam angle: 90-112°
• Weight: 4.1 kg
• Dimensions (LxWxH): 818x291x116 mm
• Lifespan: 90% light output achieved after > 90,000 hours

Details:

• Designed for 1m deep surfaces, or 2 pieces of EVO3-100 1.5 for the 1x1m grow box
• Best light intensity and homogeneity when using 2 pieces of EVO3-100 1.5 per square metre
• Economical 200W power consumption
• Tilting allows you to further optimise homogeneity
• The secondary optics offer the best protection and are easy to clean
• The optional dimmer allows you to adjust the light intensity for different growth phases

Note:
No cables or accessories are included, these are available as optional extras!