SANlight EVO-Series LED EVO 6-150 1.5 Full Spectrum 400W

SANlight EVO 6-150 1.5 with 400W LED grow lamp - plant lighting at the highest level

The new EVO 6 lights have been developed to meet the increasing demand for a more powerful and efficient lighting solution for projects of all kinds. The EVO 6-150 has the same length as the EVO 5-150 but with a higher power density. The extra module not only provides homogeneous illumination but also a higher light intensity of 1090 µmol/s at 400 W.

Here we present you with numerous facts about the new Sanlight EVO-Series 1.5 LED grow lamp.

Efficiency is not just a number in the data sheet

With the EVO series, SANlight offers advanced efficiency of more than 3µmol/J at the module level. However, during development, much more attention was paid to the yield per area and time. In countless empirical tests, the spectrum was optimised in the best possible way. The resulting broadband light spectrum extends beyond the conventional PAR range and offers a far red to red ratio that positively influences photo-morphogenesis, and thus also the quality and quantity of the harvest.

Protection and light control

As in the past, SANlight remains true to its very high quality standards. Thus, over a service life of 90,000 hours, only 10% of the light output is lost. In the development of the EVO series, the protective and light-directing secondary optics were optimised to the geometric dimensions of the luminaire. This results in incredibly homogeneous illumination with the best light intensity (PPFD). The asymmetrical secondary optics also minimise losses when transporting photons to the plants and at the same time protect the LEDs from environmental influences to which the luminaire is exposed during plant cultivation. Sulphur and other chemical substances cannot penetrate to the LED. This prevents oxidation of the LED chip reflector. The optics can be easily cleaned. The protection and the possibility of cleaning guarantee you a constant light output over many years.

The finest technology

From an almost unmanageable selection of LEDs available on the market, SANlight has selected only the best for you. As in previous years, SANlight has chosen the latest OSRAM high-power LEDs for red and far-red LEDs. When it comes to white LEDs, SANlight was convinced by the patented WICOP technology from Seoul Semiconductor. The LEDs with this technology are characterised by the absence of lead frames and silver, making them particularly robust and highly efficient.

Ready-to-dim

Every model in the EVO series is ‘ready-to-dim’. This means that the LED light is compatible with typical greenhouse control systems. Alternatively, you can retrofit the LED grow lamp with the available magnetic dimmer or Bluetooth dimmer. Compared to rotary potentiometers, SANlight dimmers are wear-free and resistant to humidity and water.

Professionalism starts with the cable

In the EVO series, all plug connections are made with high-quality waterproof connectors, which have become established in commercial horticulture over the last few decades. All accessories offered by the manufacturer are designed for the harsh greenhouse environment. This means you can easily and securely configure and dim your system according to your ideas, or connect it to a ‘daisy chain’.

Maximisation

In most grow rooms, filters and ventilation systems are mounted on the ceiling. With the EVO series, the required equipment can be positioned between the LED lights, and not a single centimetre of usable height is lost. Due to their design, lighting systems from other manufacturers have to be mounted under the ventilation system. This wastes significantly more space. This applies to both small grow tents and large professional installations.

Technical data EVO 6-150 1.5:

• 1x EVO 6-150 LEDs is ideal for a footprint of up to 150x150cm
• Power input: 400W
• Power factor: > 0.95
• Input voltage range: 100-240/277 50/60 Hz
• maximum input current: 1.75@220Vac
• protection class: IP65
• permissible ambient temperature: 5-35°C
• maximum relative humidity: 99%
• emission wavelength: 400-780 nm
• photon flux density: 1090 µmol/s
• efficiency: > 3 µmol/s
• Beam angle: 90-112°
• Weight: 6.4 kg
• Dimensions (LxWxH): 1318x291x116 mm
• Lifespan: 90% light output achieved after > 90,000 hours

Details:

• Developed as a project light for high rooms and open spaces
• CO2 supplementation and dimmer recommended for tent applications
• When used without additional CO2 fumigation, the greatest horticultural care is advised
• Recommendations for other tent or room sizes on request
• 400 W at 1090 µmol/s

Note:
Cables and accessories are not included in the scope of delivery, but are optionally available!
Due to the size of the LED, an oversize surcharge will be applied. This will be displayed at the end of the shopping process.